Structural steel has been used extensively in the construction of commercial buildings since the first steelframed building, the Rand Mcnally Building erected in 1890.
Since then, steel has been used for major construction projects. The availability of steel makes it much easier to use.
First, it bonds well to concrete and has many features that make it even better than concrete when it comes to construction projects.
Steel is still one of the preferred material options in construction, as it takes less time to build and contributes to a perfect combination of lightness, high strength, and ease of manufacture.
It has been an important component in commercial construction projects. Speaking of steel, H and V beams are two of the most common structural members used in construction to provide support for buildings and walls. Let’s take a look at these two structural members.
What Is HBeam?
H beam is a structural beam made of rolled steel. It is incredibly strong. It gets its name because it looks like a capital H over the crosssection.
Hbeam has wider flanges than Ibeam, but Ibeam has tapered edges. The width is the flange and the height is the web.
The difference between the H and I beams is the flange per band ratio. The H beam tends to be heavier than the I beam, which is why some say it is better than the I beam, but this is subjective, as the H beam is generally heavier.
Also, read: Tension Vs Compression  What Is Tension & Compression
What Is IBeam?
An Ibeam is shaped like an I. The Ibeam consists of two horizontal planes, known as flanges, connected by a vertical component or the weft.
Ibeam has tapered edges and gets its name because it looks like a capital letter when you see it through the crosssection. With an Ibeam, the height of the crosssection is greater than the width of its flange.
Difference Between HBeam and IBeam
HBeam and IBeam: Basics of
The H beam, as the name suggests, is an Hshaped structural member made of rolled steel and is known as a wide flange beam.
It is one of the most used structural members in the United States. It looks like an ‘H’ over the crosssection and is incredibly strong and has a larger surface area in the crosssection of the beam.
I beam, on the other hand, is also known as an H beam, but it looks like an ‘I’ of the crosssection. It is basically a beam of rolled steel or a beam with a crosssection in the form of the capital letter I.
HBeam and IBeam: Projects
In terms of design, H beams have longer, wider and heavier flanges than I beams, but both terms H beam and I beam can be used interchangeably most of the time and are commonly called laminated steel beams (RSJ) The horizontal element at the top and bottom of a beam is called a flange, which is usually narrower on Ibeams, but is almost equally wide as such.
The height of a beam is the web, which is thicker in H beams, which makes them relatively stronger than I beams. 1beams, on the other hand, have thin webs and conical flanges.
Also, read: What Is Rebar  Why use Reinforcement in Concrete  Types of Steel Reinforcement Bars
Bbeam and Bbeam: Strength
The Hbeams are made of economically sectioned steel, with a more optimized crosssectional distribution area and a reasonable strengthtoweight ratio, which means it can provide more strength per unit weight.
This makes welding the Hbeams relatively simpler than that of the Ibeams. And due to its larger surface area in the crosssection, it is considered to have a high strength rate.
However, Ibeams are generally deeper than wide, which makes them quite good for supporting load under local buckling. In addition, I beams are lighter than H beams, which means that they will not be able to withstand as much force as H beams.
Also, read: Bolt Vs Screw  What Is Bolt  What Is Screws
HBeam and IBeam: Applications
Since H beams have thicker walls and flanges, they are ideal for mezzanines, platforms, bridges and other common residential and commercial buildings.
Wide flanges are commonly used in residential projects. The internal dimensions of the Hbeams are constant, in order to make them the preferred choice of material in the structure of the trailer and truck.
Ibeams, with their greater resistance to flanges, are the preferred form choice for structural steel buildings, bridges, and other civil projects.
In addition to commercial and residential construction projects, they are also used to make structures and support columns for rails, elevators, beds for trailers and trucks, winches and elevators.
Also, read: What Is Bar Bending Schedule  Preparation as Per Bs 4466  Tolerances as Per Bs 4466
Which Is The Heaviest?
 The H beam is generally much heavier than the I beam, which means it can receive more
 In some buildings where weight and strength on the wall can represent a structural problem, the Ibeam may be better, as it is generally lighter.
Web Center
 An H beam has a thicker central web, which means that it is generally stronger.
 An I beam generally has a thinner central web, which means that it is often not able to receive as much force as an H beam.
Built
 An H beam can be mounted, which means that it can be mounted at any size or height.
 An I beam can only be constructed as long as the manufacturer’s milling equipment allows.
Spans
 H beams can be used for spans up to 330 feet.
 An Ibeam can be used for spans from 33 to 100 feet.
Flanges
 Hbeam: Hbeams have top and bottom flanges that stick out further from the web than the flanges on Ibeams.
 Ibeam: Ibeams have top and bottom flanges, and they are shorter and are not as wide as Hbeams.
Number of Pieces
 The H beam looks like a piece of metal but has a chamfer in which three pieces of metal come together.
 An I beam is not made by welding or riveting metal sheets together and is just a piece of metal throughout.
Summary
Although the terms beam H and I are often used interchangeably in the construction industry, saying that one is better than the other is quite subjective.
Both are the two most common structural steel beams used in various structural steelmakers, as support beams for the construction of commercial and residential buildings.
Both look almost the same on the outside, except that they differ in geometry. These are the two versions of steel structural beams used in a wide range of applications.
The H beam has an Hshaped crosssection, while the I beam has a crosssection in the form of the capital letter ‘I’.
Technically, an Ibeam can be referred to as an Hbeam with slightly different mechanical properties, such as strength/weight ratio, load capacity, tensile strength and so on.
I Beam
An l beam is shaped like an I. The I beam consists of two horizontal planes, known as flanges, connected by one vertical component, or the web. Ibeam has tapered edges and it gets its name from the fact that it looks like a capital I when you see it from its cross section. With an Ibeam, the height of the cross section is higher than the width of its flange.
HBeam
Hbeams are shaped like an H. Hbeam is a structural beam made of rolled steel. It is incredibly strong. It gets its name because it looks like a capital H over its crosssection.
H Beam Vs I Beam
H beams are made of rolled steel, and they get their name because the cross section resembles a capital H. Compared to an I beam, the H beam consists of longer flanges and a thicker centre web. The flanges on an I beam are tapered.
Difference Between H Beam and I Beam
H–beam: The H–beam looks like one piece of metal but it has a bevel where three pieces of metal come together. Ibeam: An Ibeam is not made by welding or riveting sheets of metal together and is only one piece of metal throughout.
I Beam vs W Beam
An Ibeam has tapered flanges with a narrower flange than most wide flange beams, making it a lighter building material. A wide flange beam, with wider flanges and web than the Ibeam, can handle more weight, but this makes it heavier overall.
Construction Beams
Different types of beams are used in the construction of buildings and structures. These are horizontal structural elements that withstand vertical loads, shear forces, and bending moments. Beams transfer loads that imposed along their length to their endpoints such as walls, columns, foundations, etc.
Which Is Stronger H Beam or IBeam?
Hbeam: An Hbeam has a thicker center web, which means it is often stronger. Ibeam: An Ibeam often has a thinner center web, which means it is often not able to take as much force as an hbeam
What Are I Beams Used For?
I beams have a variety of important uses in the structural steel construction industry. They are often used as critical support trusses, or the main framework, in buildings. Steel I beams ensure a structure’s integrity with relentless strength and support.
What Is the Strongest Beam Shape?
This structure reduces the danger of lateral buckling as each beam finds the shortest unbraced path within the structure. Also loads are distributed evenly at each tetrahedral joint. A tessellation of hexagons is the strongest isotropic geometry when considering only two dimensions.
What Is the Strongest Beam Design?
IBeam is the quintessential beam profile. The design is super strong in the vertical direction, yet has a uniform and equal response to other forces. It has the best strength to weight ratio (vertical) making it a great DIY beam profile — for Cranes, and for the main beams of big and/or long trailers.
Is C Channel Stronger Than IBeam?
Csection channel overcomes this by moving the web out to one edge of the flanges, changing the crosssection from an “I” to a “C” in the process. Csection thus has three flat surfaces for mounting to. It’s still strong, although this geometry does give up a little of the rigidity of the Ibeam.
What Type of Steel Is I Beam?
IBeams are commonly made of structural steel but can be formed out of aluminum. Ibeams are most widely used in construction and can have an application for use in both beams as well as columns. InfraMetals offers many different sizes, lengths, and specifications for Ibeams.
What Is the Main Disadvantage of IBeam?
A huge disadvantage to the Ibeam is that it’s very susceptible to heat. If it gets heated up it can bend and fail causing a huge problem. Ibeams are usually insulated to protect them from the heat because of this fact.
What Is the Main Advantage of IBeam?
I beams are the choice shape for structural steel builds because of their high functionality. The shape of I beams makes them excellent for unidirectional bending parallel to the web. The horizontal flanges resist the bending movement, while the web resists the shear stress.
What Is the Main Disadvantage of HBeam?
Steel beams are strong and versatile, but they do have some disadvantages when compared to wood beams. Steel beams make skyscrapers possible. Steel beams have a high cost, are heavy, will rust over time and pollute the environment.
What Is the Main Advantage of HBeam?
Due to their slightly different crosssection shape, thicker central web and wider flanges, H beams can bear larger loads than I beams. While both are advantageous loadbearing structures, due to how long H beams can span for, they are more reliable for largerscale projects.
What Is Stronger H Beam or I Beam?
Hbeam: An Hbeam has a thicker center web, which means it is often stronger. Ibeam: An Ibeam often has a thinner center web, which means it is often not able to take as much force as an hbeam.
Which Way Is I Beam Stronger?
The section modulus for an Ibeam, when compared to a solid rectangular beam of the same cross sectional area is much higher. This is because more fibres are distributed away from the neutral axis.
Who Invented the I Beam?
The world’s first steel building, the Rand McNally building of 1889, gave the Ibeam the perfect moment to show its strength. Halbou invented the Ibeam, but an English engineer named Henry Grey perfected it.
What Size I Beam Do I Need?
Is Square Tubing Stronger Than IBeam?
Rectangular tube with the longest dimension vertical is next and square is worst because the I for regular sections depends on the third power of the vertical dimension. Tube is stronger.
What Is the Purpose of an I Beam?
I beams are the choice shape for structural steel builds because of their high functionality. The shape of I beams makes them excellent for unidirectional bending parallel to the web. The horizontal flanges resist the bending movement, while the web resists the shear stress.
What Are I Beams Made Of?
IBeams, also known as HBeams have and I or H crosssection. IBeams are commonly made of structural steel but can be formed out of aluminum. Ibeams are most widely used in construction and can have an application for use in both beams as well as columns.
What Is H Beam Used For?
H Beams are commonly used in the construction of buildings as well but also large trailers and bridges, among others. Due to their slightly different crosssection shape, thicker central web and wider flanges, H beams can bear larger loads than I beams.
What Is H Beam Sizes?
Classification (Height × Flange width) 
Standard crosssection dimensions (mm) 

H×B  r  
100×100  *100×100  8 
125×125  125×125  8 
150×150  150×150  8 
175×175  175×175  13 
200×200  200×200  13 
*200×204  13  
250×250  *244×252  13 
250×250  13  
*250×255  13  
300×300  *294×302  13 
300×300  13  
*300×305  13  
350×350  *344×348  13 
*344×354  13  
350×350  13  
400×400  400×400  22 
Why Do We Use I Beams?
I beams are the choice shape for structural steel builds because of their high functionality. The shape of I beams makes them excellent for unidirectional bending parallel to the web. The horizontal flanges resist the bending movement, while the web resists the shear stress.
What Is the Longest Steel Beam?
Spans in excess of 20 m can be achieved (for the purposes of this article the definition of long span is taken as anything in excess of 12 m). Generally long spans result in flexible, columnfree internal spaces, reduce substructure costs, and reduce steel erection times.
Is Standard H Beam?
Beams or columns under the standard have nominal flange width same as depth up to nominal beam depth 300 mm. Beam depth larger than 300 mm have nominal flange width 300 to 400 mm. Beams and column section are manufactured with heavy, medium and light flange and web thickness.
What Is the Weight of an I Beam?
Ordinary Hot Rolled I Beam Sizes & Weight Chart
Specifications 
Height (mm) 
Theoretical Weight (kg/m) 
10  100  11.261 
12.6  126  14.223 
14  140  16.890 
16  160  20.513 
18  180  24.143 
20a  200  27.929 
20b  200  31.069 
22a  220  33.070 
22b  220  36.524 
25a  250  35.105 
25b  250  42.030 
28a  280  43.492 
28b  280  47.888 
32a  320  52.717 
32b  320  57.741 
32c  320  62.765 
36a  360  60.037 
36b  360  65.689 
36c  360  71.341 
40a  400  67.598 
40b  400  73.878 
40c  400  80.158 
45a  450  80.420 
45b  450  87.485 
45c  450  94.550 
50a  500  93.654 
50b  500  101.504 
50c  500  109.354 
56a  560  106.316 
56b  560  115.108 
56c  560  123.900 
63a  630  121.407 
63b  630  131.298 
63c  630  141.189 
What Is I Beam Sizes?
Steel IBeam Sizes (Wide Flange)
Name  Depth 
Weight lbs/ft 
W 27 x 178  27.80  178 
W 27 x 161  27.60  161 
W 27 x 146  27.40  146 
W 27 x 114  27.30  114 
W 27 x 102  27.10  102 
W 27 x 94  26.90  94 
W 27 x 84  26.70  84 
W 24 x 162  25.00  162 
W 24 x 146  24.70  146 
W 24 x 131  24.50  131 
W 24 x 117  24.30  117 
W 24 x 104  24.10  104 
W 24 x 94  24.10  94 
W 24 x 84  24.10  84 
W 24 x 76  23.90  76 
W 24 x 68  23.70  68 
W 24 x 62  23.70  62 
W 24 x 55  23.60  55 
W 21 x 147  22.10  147 
W 21 x 132  21.80  132 
W 21 x 122  21.70  122 
W 21 x 111  21.50  111 
W 21 x 101  21.40  101 
W 21 x 93  21.60  93 
W 21 x 83  21.40  83 
W 21 x 73  21.20  73 
W 21 x 68  21.10  68 
W 21 x 62  21.00  62 
W 21 x 57  21.10  57 
W 21 x 50  20.80  50 
W 21 x 44  20.70  44 
W 18 x 119  19.00  119 
W 18 x 106  18.70  106 
W 18 x 97  18.60  97 
W 18 x 86  18.40  86 
W 18 x 76  18.20  76 
W 18 x 71  18.50  71 
W 18 x 65  18.40  65 
W 18 x 60  18.20  60 
W 18 x 55  18.10  55 
W 18 x 50  18.00  50 
W 18 x 46  18.10  46 
W 18 x 40  17.90  40 
W 18 x 35  17.70  35 
W 16 x 100  16.97  100 
W 16 x 89  16.75  89 
W 16 x 77  16.52  77 
W 16 x 67  16.33  67 
W 16 x 57  16.43  57 
W 16 x 50  16.26  50 
W 16 x 45  16.13  45 
W 16 x 40  16.01  40 
W 16 x 36  15.86  36 
W 16 x 31  15.88  31 
W 16 x 26  15.69  26 
W 14 x 132  14.66  132 
W 14 x 120  14.48  120 
W 14 x 109  14.32  109 
W 14 x 99  14.16  99 
W 14 x 90  14.02  90 
W 14 x 82  14.31  82 
W 14 x 74  14.17  74 
W 14 x 68  14.04  68 
W 14 x 61  13.89  61 
W 14 x 53  13.92  53 
W 14 x 48  13.79  48 
W 14 x 43  13.66  43 
W 14 x 38  14.10  38 
W 14 x 34  13.98  34 
W 14 x 30  13.84  30 
W 14 x 26  13.91  26 
W 14 x 22  13.74  22 
W 12 x 136  13.41  136 
W 12 x 120  13.12  120 
W 12 x 106  12.89  106 
W 12 x 96  12.71  96 
W 12 x 87  12.53  87 
W 12 x 79  12.38  79 
W 12 x 72  12.25  72 
W 12 x 65  12.12  65 
W 12 x 58  12.19  58 
W 12 x 53  12.06  53 
W 12 x 50  12.19  50 
W 12 x 45  12.06  45 
W 12 x 40  11.94  40 
W 12 x 35  12.50  35 
W 12 x 30  12.34  30 
W 12 x 26  12.22  26 
W 12 x 22  12.31  22 
W 12 x 19  12.16  19 
W 12 x 16  11.99  16 
W 12 x 14  11.91  14 
W 10 x 112  11.36  112 
W 10 x 100  11.10  100 
W 10 x 88  10.84  88 
W 10 x 77  10.60  77 
W 10 x 68  10.40  68 
W 10 x 60  10.22  60 
W 10 x 54  10.09  54 
W 10 x 49  9.98  49 
W 10 x 45  10.10  45 
W 10 x 39  9.92  39 
W 10 x 33  9.73  33 
W 10 x 30  10.47  30 
W 10 x 26  10.33  26 
W 10 x 22  10.17  22 
W 10 x 19  10.24  19 
W 10 x 17  10.11  17 
W 10 x 15  9.99  15 
W 10 x 12  9.87  12 
W 8 x 67  9.00  67 
W 8 x 58  8.75  58 
W 8 x 48  8.50  48 
W 8 x 40  8.25  40 
W 8 x 35  8.12  35 
W 8 x 31  8.00  31 
W 8 x 28  8.06  28 
W 8 x 24  7.93  24 
W 8 x 21  8.28  21 
W 8 x 18  8.14  18 
W 8 x 15  8.11  15 
W 8 x 13  7.99  13 
W 8 x 10  7.89  10 
W 6 x 25  6.38  25 
W 6 x 20  6.20  20 
W 6 x 16  6.28  16 
W 6 x 15  5.99  15 
W 6 x 12  6.03  12 
W 6 x 9  5.90  9 
W 5 x 19  5.15  19 
W 5 x 16  5.01  16 
W 4 x 13  4.16  13 
What Is a Standard IBeam?
The standard IBeam is named for their distinctive shape, similar to a capital letter “I”. The horizontal pieces are known as flanges, and the vertical piece is called the web. This shape is very efficient for carrying loads of weight without bending.
What Is the Smallest Size I Beam?
3 inch was the smallest I have found. Furthermore, what is the standard size of beam? The standard size of beam is 9″x12″, which is usually used in many of the residential building.
What Is the Difference Between an I Beam and an H Beam?
Hbeam: The Hbeam looks like one piece of metal but it has a bevel where three pieces of metal come together. Ibeam: An Ibeam is not made by welding or riveting sheets of metal together and is only one piece of metal throughout.
What Is the Standard Size of a Beam for Building?
In a residential building is 9 ʺ × 12 ʺ or 225 mm × 300 mm according to the (IS codes). The minimum size of the RCC beam should not be less than the 9 ʺ× 9 ʺ or 225mm × 225mm with the addition of slab thickness which is 125mm.
How Do I Choose Beam Size?
To calculate the necessary depth of a beam, divide the span (in inches) by 20. For example, a 25′ span would be 25×12 / 20 = 15”. The width of this beam would be between 1/3 and ½ the depth. The dimensions of a girder would be the same, but the flange would be thicker.
How Far Can I Span a Beam?
When supporting joists that span 12 feet with no overhang beyond the beam, a double ply beam can span in feet a value equal to its depth in inches. A double 2×12 beam can span 12 feet; a (2) 2×10 can span 10 feet and so on.
How Far Can a Steel IBeam Span Without Support?
You can get a tall enough steel Ibeam that will span 25 feet with no columns. When supporting joists that span 12 feet with no overhang beyond the beam, a double ply beam can span in feet a value equal to its depth in inches.
How Far Can an H Beam Span?
Spans in excess of 20 m can be achieved (for the purposes of this article the definition of long span is taken as anything in excess of 12 m). Generally long spans result in flexible, columnfree internal spaces, reduce substructure costs, and reduce steel erection times.
How Much Does a Steel H Beam Cost?
Hbeams cost $11 to $16 per linear foot on average, and are stronger than Ibeams, but weigh more at 13 to 15 pounds per foot. Hbeams, also called Wbeams, are for columns and longer beam spans up to 300 feet due to their weightbearing capacity.
How Much Does an IBeam Cost?
Installing steel beams costs $3,104 on average, with most homeowners paying between $1,426 and $5,068 (including labor). Prices could run anywhere from $300 to $9,000, depending on the type of project. Expect a higher project quote if you need to replace a loadbearing wall.
How Much Weight Will a Steel Beam Hold?
If you have a beam of steel which has a basic permissible bending stress of about 23000 lbs per square inch, by the time you make allowances for the span and the lack of restraint, the actual bending stress that the beam can handle is down to about 6100 lbs per square inch under these conditions.
How Do I Identify an IBeam?
In Canada and the United States, steel Ibeams are commonly specified using the depth (in inches) and weight of the beam (in pounds per foot). For example, a “4 x 13” Ibeam is approximately 4 inches in depth (the measurement taken from the outer face of the first flange, to the outer face of the opposite flange).
How Much Is a Steel Beam Cost?
Steel Structural Beam Prices vs. Other Materials
Type of Beam  Average Cost Range Per Linear Foot* 
Steel  $6 – $20 
Wood  $5 – $30 
LVL  $3 – $12 
Aluminum  $13 – $30 
How Do You Find the Area of an H Beam?
The crosssectional area is the breadth times the depth of the structure. For example, if you have a rectangular beam spans 6m with 450mm X 600mm beam size, then the length of the beam will be 6000mm and the crosssectional area will be 450X600 = 270000 mm^{2}.
How Do You Find the Unit Weight of an H Beam?
For haunches, the weight is calculated as follows: G = Lh * mweight, where Lh = S – h / 2 * tan(a) S is the saw length of the beam. h is the profile height. a is the largest angle formed by a saw plane with the beam web (less than PI/2).
How Strong Is a Steel I Beam?
Ranges of yield strength: A36: 36,000 psi (250 MPa) A572: 42,000–60,000 psi (290–410 MPa), with 50,000 psi (340 MPa) the most common.
How Do You Size an IBeam?
To calculate the necessary depth of a beam, divide the span (in inches) by 20. For example, a 25′ span would be 25×12 / 20 = 15”. The width of this beam would be between 1/3 and ½ the depth.
How Do I Choose a Beam?
 Specify the loading details of the steel Ibeam.
 Draw the diagram for the bending moment based on the given details. Thus, you’ll be able to find the maximum value of the bending moment.
 Choose the estimated size of the steel Ibeam.
 Find out the area moment of inertia of the steel Ibeam.
 Find out the beam depth.
How Big of an IBeam Do I Need?
To calculate the necessary depth of a beam, divide the span (in inches) by 20. For example, a 25′ span would be 25×12 / 20 = 15”. The width of this beam would be between 1/3 and ½ the depth. A beam overhang can be a maximum of 3/8 of the supported span.
How Strong Is an Aluminum I Beam?
Ibeams are of 6061T6. Which has a yield strength of 40 ksi. The two section modules I found were 2.81 cubed inches for the lighter and 3.36 inches cubed for the heavier. The lighter having a web thickness of 0.15in and a flange thickness of.
How Do You Read an IBeam Size?
In the United States, steel Ibeams are commonly specified using the depth and weight of the beam. For example, a “W10x22” beam is approximately 10 in (25 cm) in depth (nominal height of the Ibeam from the outer face of one flange to the outer face of the other flange) and weighs 22 lb/ft (33 kg/m).
How Do I Know What Size Steel Beam I Need?
To calculate the necessary depth of a beam, divide the span (in inches) by 20. For example, a 25′ span would be 25×12 / 20 = 15”. The width of this beam would be between 1/3 and ½ the depth. The dimensions of a girder would be the same, but the flange would be thicker.
How Do I Know What Size Beam I Need?
The distance across the center of the beam for which the irradiance (intensity) equals 1/e2 of the maximum irradiance (1/e2 = 0.135) is defined as the beam diameter. The spot size (w) of the beam is defined as the radial distance (radius) from the center point of maximum irradiance to the 1/e2 point.
How Do I Order Steel Beams?
 Locate the beam you wish to order on your steel drawing plans and turn to the general instructions at the front of your building plans.
 Note down on your piece of paper the type of flange of the beam.
 Note the measurements of the flange.
 Write down the weight per foot of the beam.
 Write down the overall length of the beam.
 Turn to the detail page in your steel beam installation drawings and your building plans that shows the types of connections for your beam.
How Far Can a Steel Beam Span Without Support?
You can get a tall enough steel Ibeam that will span 25 feet with no columns. When supporting joists that span 12 feet with no overhang beyond the beam, a double ply beam can span in feet a value equal to its depth in inches. A double 2×12 beam can span 12 feet; a (2) 2×10 can span 10 feet and so on.
How Much Does a Structural Beam Cost?
The average cost to install a steel beam is $1,200 to $4,200 or between $100 and $400 per foot, which includes a structural engineer’s inspection, permits, the beam, delivery, and installation.
Type  Per Foot Installed  Total Cost Installed 
LVL Beam  $50 – $200  $800 – $2,500 
Steel IBeam  $100 – $400  $1,200 – $4,200 
Steel IBeam (Complex)  $500+  $6,000 – $10,000 
How Much Load Can a Beam Support?
If you have a beam of steel which has a basic permissible bending stress of about 23000 lbs per square inch, by the time you make allowances for the span and the lack of restraint, the actual bending stress that the beam can handle is down to about 6100 lbs per square inch under these conditions.
What Are Aluminum IBeams Used For?
Ibeams are the standard shape for aluminum beams used in floor and ceiling joists, to ensure that a structure will be physically sound.
Are Aluminum Beams as Strong as Steel?
Even with the possibility of corrosion, steel is harder than aluminum. Steel is strong and less likely to warp, deform or bend underweight, force or heat. Nevertheless, the strength of steel’s tradeoff is that steel is much heavier/much denser than aluminum. Steel is typically 2.5 times denser than aluminum.
Is 7075 Aluminum Stronger Than Steel?
7075 is able to match most steel alloys in terms of strength. On the other hand, 7075 is one of the strongest aluminum alloys available. While 7075 is less workable than 6061, if your greatest consideration is strength, then 7075 is probably the better choice.
What Are the Dimensions of an IBeam?
Standard Steel IBeam Sizes, Dimensions and Section Properties Chart
Designation  Nom.Weight, lb/ft  Web Thickness tw, in 
S15 x 50  50.00  0.550 
S15 x 42.9  42.90  0.411 
S12 x 50  50.00  0.687 
S12 x 40.8  40.80  0.462 
S12 x 35  35.00  0.428 
S12 x 31.8  31.80  0.350 
S10 x 35  35.00  0.594 
S10 x 25.4  25.40  0.311 
S8 x 23  23.00  0.441 
S8 x 18.4  18.40  0.271 
S7 x 20  20.00  0.450 
S7 x 15.3  15.30  0.252 
S6 x 17.25  17.25  0.465 
S6 x 12.5  12.50  0.232 
S5 x 14.75  14.75  0.494 
S5 x 10  10.00  0.214 
S4 x 9.5  9.50  0.326 
S4 x 7.7  7.70  0.193 
S3 x 7.5  7.50  0.349 
S3 x 5.7  5.70  0.170 
Is Standard H Beam Sizes?
Hbeams are widely used in the construction industry and are available in a variety of standard sizes. Hbeams may be used both as beams and as columns. Gunung Garuda’s hot rolled HBeam comes with standard size range from 100×100 up to 350×350.
How Do You Calculate H Beam Volume?
First, multiply the thickness times height times length for the central part of the Ibeam to get its volume in cubic inches. Performing this step for example used above leads to 3 inches times 15 inches times 130 inches, or 5,850 cubic inches.
What Is an HBeam Used For?
Hbeam gets its name because over its crosssection it looks like a capital H and has a wider flange(s). Often referred to as WF or wide flange beams, Hbeams are used in the bridge construction, buildings, cranes, truck trailers and in a wide variety of other applications.
Is H Beam Stronger Than I Beam Connecting Rods?
Hbeam rods are more difficult to machine, so they are often more expensive. Ibeam rods are easier to produce and can sometimes be lighter than Hbeams. All other variables being equal, Hbeam rods are the strongest design.
Structural Steel Beams
Beam is a main structural steel shape used in many applications, including bridges, buildings, skids, structures, and general fabrication.
Which Is Stronger H Beam or I Beam?
Hbeam: An Hbeam has a thicker center web, which means it is often stronger. Ibeam: An Ibeam often has a thinner center web, which means it is often not able to take as much force as an hbeam.
Like this post? Share it with your friends!
Suggested Read
 Live Load Vs Dead Load  What Is Load in Civil
 Difference Between Lap Length and Development Length
 Tension Vs Compression  What Is Tension & Compression
 Difference Between Plasticizer And Superplasticizer in Civil
 Difference Between Plinth Level, Sill Level, and Lintel Level
 Difference Between One Way Slab and Two Way Slab  What is Slab
 Vitrified Tiles vs Ceramic Tiles  Whаt Is Vitrified Tiles & Ceramic Tіlеѕ
 Difference Between Timber And Wood  What is Wood  What is Timber
 Difference Between Beam and Column  What Is Beam  What Is Column
 Difference Between Bridge and Culvert  What Is Bridge  What Is Culvert
 Difference Between Flyover and Bridge  What Is Flyover  What Is Bridge
 Difference Between M Sand Vs River Sand  What is MSand & River Sand
 Difference Between Footing and Foundation  What is Footing and Foundation
 Difference Between OPC Vs PPC  What is Cement  OPC Cement  PPC Cement
 Difference Between Short Column and Long Column  What Is Column  Type of Column
 Difference Between Mortar and Concrete  What Is Mortar & Concrete  Type of Mortar &Concrete
You mismatched all pictures … you show and write I beams for H beams and H beams for I beams… pathetic
Mistake slove sir.