|
Sheet Metal SLITTING MACHINES
A+ Rating
Click to request a quote or call 773-334-5000
to order a machine.
Looking for a low
cost machine to quickly cut lots of long sheet metal pieces? Well look
no further. A sheet metal slitter machine will cut up to any length
of material you want. When your metal comes from sheet stock, a Gary
slitter will be a great addition to your shop for fast cutting needs.
Available in single cut or multi-cut. If you cant afford to buy a Gary,
we offer the less expensive Tin Knocker brand.
GARY
single cut Slitter
Sturdy
24 inch throat slitter with quick adjusting back gauge and scale.
Made in USA.
Click
to request a quote for this machine
•
Die-set type gauge mounting that insures easy setting and consistent
squareness.
• Gauge mounting rods are extended to provide convenient carrying
handles.
• Gauge is easily removed for machine transport and re-installed
with no resquaring.
• Slitter knives are proven GARY "quickset" design manufactured
from tool steel.
• Knives are outboard mounted for easy access knives are reversible
, intervals between sharpening is double that of a single edge knives.
• "Adiprene" stripper rings are non-marking and serve to hold
the material flat reducing twist.
• Dual bearings mounted at knife end to minimize deflection
and increase knife life.
• Heavy duty roller chain drive with by 1/3 HP gearmotor.
• Standard 110 volt with grounded plug. 6 amps.
• Options: Stand, extra Knives, Stripper Rings
|
| GARY
3354 Rotary Slitter |
| Capacity:
16 Gauge (.06") |
| Throat:
24" |
| Motor:
1/3 HP, 110 volts |
| Minimum
Slitting Width: 1" |
| Maximum
Slitting Width: 24" |
| Shipping
Weight: 450 Lbs. |
|
Sheet fed multiple
cut Slitting machines
|
GARY 3350DX
multi-cut Gang Slitter
Click
to request a formal quote for this machine
* This machine can slit 4 foot wide sheet metal into 3 or 4 pieces
in one pass.
* With the right knives and strippers you can slit different sheet
metals, wire screen, fiberglass screen, gasket materials, cork,
foam rubber, polystyrene, plastic and formica.
* 3" diameter cold - roll turned, ground and polished shafts mounted
in dual wall ball bearings lubricated for life.
* Gauge mounted on each side for left or right hand use.
* End frames are aluminum - magnesium alloy.
* Rugged lightweight GARY torsion tube assembly.
* Heavy gauge steel with "T" bar reinforcement.
* Slitter knives are proven GARY "quickset" design manufactured
from tool steel.
* Knives are "reversible", intervals between sharpening is double
that of a single edge knives.
* 2 sets of standard 3" X 5" X 3/4" wide high-carbon tooling is
included.
* 60 feet per minute standard operating speed.
* Heavy duty roller chain drive powered by 3/4 HP gearmotor. Variable
speed is optional.
* Electricity: Choose 110 volts 1 phase
or optional 240v 3 phase or 480 volts 3 phase.
* Maximum sheet width: 49"
* Cutting rate: 40 feet per minute
* Machine weight: 480 Lbs.
* Made in USA
|
Maximum
number of simultaneous cuts:
30 gauge (.015") metal: 12 cuts
28 gauge (.018") metal: 8 cuts
26 gauge (.021") metal: 6 cuts
24 gauge (.024") metal: 4 cuts
22 gauge (.031") metal: 3 cuts
20 gauge (.036") metal: 2 cuts
18 gauge (.048") metal: 2 cuts
16 gauge (.060") metal: 1 cut
|
|
Tin Knocker
multi-cut Gang Slitter
Click
to request a formal quote for this machine
• This machine can make multiple cuts in one pass.
• Great machine for roofing company.
• Gang slit blanks from 16 gauge to 30 gauge.
• Gang slit galvanized sheet metal, copper, pre-painted metals
and other materials.
FEATURES:
• 2 sets of reversible cutting knives.
• Tool steel blades with stripper rings.
• Stripper fingers to prevent twist.
• Optional third set of knives available.
• Heavy duty chain drive.
• Bearings lubricated for life.
SPECIIFCATIONS:
• Maximum Cutting Width: 48-1/2 inches
• Width between end frames: 52 inches
• Feed Speed: 60 Feet Per Minute
• Electrics: 1 phase, 110 or 220 Volts
• Motor: 3/4 HorsePower
• 3 inch diameter polished steel shafts
• Knife Sizes: 3 inch I.D. x 5 inch O.D. x ¼ thick
• Table Height: 35 inches
• Shipping Weight: 525 Lbs.
• Ship Dimensions: 67 x 37 x 48 inches
|
|
|