Sheets are blank flat rolled pieces of metal that can be fabricated into various products. Steel is a common material used in manufacturing sheets. Stainless Steel Sheet is a versatile product that is primarily used due to its ability to resist corrosion, and due to its formability and longevity. They are available in various grades and can be converted either into SS Strips which can be used to make welded pipes or into SS Coil. they are available in cold rolled, annealed, and controlled environment finishes. These sheets are measured by their thickness. Thin Stainless Steel Sheet transportation, aerospace, and food industry.
Stainless Steel Slitting Coil is used in applications that require intermittent heating at 1040 degrees. It also avoids oxidation in continuous heating at temperatures upto1150 degrees. Stainless Steel Shims are resistant to corrosion, staining, and rusting. They are available in the thickness range of 0.05 to 6 mm. Stainless Steel Shim Stock is used to create support and ensure that a particular part is tightly fixed. Stainless Steel Mirror Sheet has a reflective polish that gives it a mirror like a look but it does not give a clear image. Stainless Steel Checker Plateis usually made using hot rolling and has a raised diamond pattern on one side and is plain on the other. Hence they are also known as Diamond Stainless Steel Plate.
Stainless Steel Plate suppliers recommend ASTM 304 and 304L grades for excellent welding and forming properties. ASTM A240 Stainless Steel Sheet on the other hand is ferritic steel that has a crystal structure. The material used has slight magnetism and is available in the soft annealed condition. For kitchen and marine applications,Food Grade Stainless Steel sheets are widely used. On the other hand,Brushed Stainless Steel Sheet is made up of an austenitic type of steel. Its non-reflective finish is made by course grinding followed by mesh abrasive finishing. Polished Stainless Steel Sheet is made up of brushed and mirror like finish with 316 and 304 grade.
Stainless Steel Sheet suppliers in India recommend the use of these sheets in applications that require highly reflective surfaces. One other variety of sheets available with us is the Stainless Steel Perforated Sheet. They are punched in different shapes and patterns and are used for various interior purposes.
304 Stainless Steel Material Specification: ASTM A240/ ASME SA240 304 Plate Stock Available
Grade: ASTM A240 / ASME SA240 SS 304 (UNS S30400, 1.4301), SS 304L (UNS S30403, 1.4306), SS 310S (UNS S31008, 1.4845), SS 316 (UNS S31600, 1.4401), SS 316Ti (UNS S31635, 1.4571), SS 316L (UNS S31603, 1.4404), SS 317L (UNS S31703, 1.4438), SS 321 (UNS S32100, 1.4541), SS 347 (UNS S34700, 1.455), SS 410 (UNS S41000, 1.4006) Plate, Sheet, Coils, Strips
Thickness: 4.0mm - 100mm
Size: 1000 mm x 2000mm, 1220mm x 2440mm, 4' x 8', 1250mm x 2500mm, 1500mm x 3000mm to 6000mm, 2000mm x 4000mm to 6000mm
Finishes: 2D, 2B, 4Pol, BA, X10, XL, Buff, XL Blend S, SATIN (Met with Plastic Coated), NO(8), Hairline, NO.1, NO.4, Mirror Finish
Processing: Shearing to Custom Sizes
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange)
Delivery: 15-20 days
Several colors, thicknesses and opacity options are available, Mill TC EN 10204 3.1, Third Party Inspection, NDT/DT Test Reports.
300 Series Stainless Steel Sheet/ Plate Grades: 302 – 303 – 304 – 304L – 304L Polished Plate– 304H – 309 – 309S – 309H – 310 – 310S – 310H – 316L – 316L Polished Plate– 317L – 317LMN – 321 – 321H – 330 – 347 347H
400 Series Stainless Steel Plate, Sheet Grades: 405 – 410 – 410S – 416 – 420 – 440C
Looking for Stainless Steel Sheet/ Plate supplier in India? Steel Tubes India is a prominent and perceptive Stainless Steel Sheet/ Plate exporter in India.
ASTM A240 UNS S30400 Stainless Steel 304 Plate
304 Stainless Steel Plate is a sheet of SS with a thickness of 6mm or more. SS 304 Plate is used in applications where durability is more important than saving weight. It is used in automobiles where durability is required to pass crash testing.
ASTM A240 UNS S30400 Stainless Steel 304 Coils
Hardness: Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
ASTM A240 UNS S30400 Stainless Steel 304 Strips
ASTM A240 UNS S30400 Stainless Steel 304 Sheets
The only difference between SS 304 Sheet and SS 304 Plate is the gauge (thickness) of the metal. They both have very different uses, depending on the varying durability and weight requirements for different projects.
ASTM A240 UNS S30400 Stainless Steel 304 Foil
SS 304 Foil is a very thin sheet of Stainless Steel that has been hammered or rolled flat. SS 304 Foils can be made from any type of metal, although the most commonly found foils are aluminum foil and gold foil. Aluminum foil typically has a thickness of .03mm, although any sheet of metal with a thickness of less than 0.2mm is considered a foil.
| Surface Finish | Definition | Application |
|---|---|---|
| BA | Those processed with bright heat treatment after cold rolling. | Kitchen utensils, Electric equipment, Building construction. |
| NO.3 | Those finished by polishing with No.100 to No.120 abrasives specified in JIS R6001. | Kitchen utensils, Building construction. |
| NO.4 | Those finished by polishing with No.150 to No.180 abrasives specified in JIS R6001. | Kitchen utensils, Building construction, Medical equipment. |
| HL | Those finished polishing so as to give continuous polishing streaks by using abrasive of suitable grain size. | Building Construction. |
| Stainless Steel | Tradename | UNS no. | Werkstoff No. | Density (g/cm3) |
| 304 | 304 Stainless | S30400 | 1.4301 | 8 |
| 304L | 304L Stainless | S30403 | 1.4307 | 8 |
| 304H | 304H Stainless | S30409 | 1.4948 | 8 |
| 304LN | 304LN Stainless | S30453 | 1.4311 | 8 |
| Chemical Composition % | ||||||||
| C | Mn | Si | P | S | Cr | Ni | Fe | |
| 304 | 0.08 max. | 2.00 max. | 1.00 max. | 0.045 max. | 0.03 max. | 18.0 – 20.0 | 8.0 – 10.5 | Balance |
| 304L | 0.03 max. | 2.00 max. | 1.00 max. | 0.045 max. | 0.03 max. | 18.0 – 20.0 | 8.0 – 12.0 | Balance |
| 304H | 0.04-0.10 | 2.00 max. | 1.00 max. | 0.045 max. | 0.03 max. | 18.0 – 20.0 | 8.0 – 12.0 | Balance |
| 304 | 304L | 304H | |
| Density | 8 | 8 | 8 |
| Melting Range,℃ | 1400 ℃ | 1400 ℃ | 1400 ℃ |
| Elongation % | 40 | 40 | 40 |
| Tensile Strength (Mpa) | 515 | 485 | 515 |
| Yield Strength (Mpa) | 205 | 170 | 205 |
| Hardness (Brinell) | 201 | 201 | 201 |
| Thickness (mm) | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 0.3 | 0.4 | 0.5 | 0.6 | 0.7 | 0.8 | 0.9 | 1.0 | 1.2 | 1.5 | 2.0 | 3.0 | ||
| Grade | Dimension (mm) | Weight (kg/sheet) | |||||||||||
| 304 | 1000 x 2000 | 4.76 | 6.34 | 7.93 | 9.52 | 11.1 | 12.7 | 14.3 | 15.9 | 19.0 | 23.8 | 31.7 | 47.6 |
| 1219 x 2438 (4’ x 8’) | 7.07 | 9.43 | 11.8 | 14.1 | 16.5 | 18.9 | 21.2 | 23.6 | 28.3 | 35.4 | 47.1 | 70.7 | |
| 1250 x 2500 | 7.43 | 9.91 | 12.4 | 14.9 | 17.3 | 19.8 | 22.3 | 24.8 | 29.7 | 37.2 | 49.6 | 74.3 | |
| 1524 x 3048 (5’ x 10’) | 11.1 | 14.7 | 18.4 | 22.1 | 25.8 | 29.5 | 33.2 | 36.8 | 44.2 | 55.3 | 73.3 | 110.5 | |
| 430 | 1000 x 2000 | 4.62 | 6.16 | 7.70 | 9.24 | 10.8 | 12.3 | 13.9 | 15.4 | 18.5 | 23.1 | 30.8 | 46.2 |
| 1219 x 2438 (4’ x 8’) | 6.87 | 9.15 | 11.4 | 13.7 | 16.0 | 18.3 | 20.6 | 22.9 | 27.5 | 34.3 | 45.8 | 68.7 | |
| 1250 x 2500 | 7.22 | 9.63 | 12.0 | 14.4 | 16.8 | 19.3 | 21.7 | 24.1 | 28.9 | 36.1 | 48.1 | 72.2 | |