Easy Steps to Fit Plastic Skirting Board

Preparing to Fit the Plastic Skirting Board

The first step in fitting a plastic skirting board is to prepare the area where the skirting will be installed. Make sure the walls are clean and free from any dust or debris. Measure the length of each wall where you will install the skirting board. Using a tape measure, write down these measurements for accurate cutting.

Gathering Your Tools

Before you start, gather all the necessary tools. You will need:

• Tape measure
• Plastic skirting boards
• Chop saw or handsaw
• Adhesive or nails
• Level
• Pencil

Cutting the Skirting Boards

Once you have your measurements, it’s time to cut the skirting boards to the correct length. Using your chop saw or handsaw, carefully cut each piece according to your measurements. Be sure to make straight cuts for a professional finish. If you're dealing with corners, consider making miter cuts to create a tidy joint.

Installing the Skirting Board

With your skirting boards cut to length, you can now install them along the wall. Start at one end of the wall and position the board in place. Use a level to ensure that it is straight. Mark the position lightly with a pencil if needed.

Applying Adhesive or Nailing

Apply a strong adhesive to the back of the skirting board if you are opting for adhesive installation. Press the skirting board firmly against the wall and hold it in place until the adhesive sets. If you are using nails, hammer the nails through the skirting board into the wall at regular intervals, ensuring the board remains level.

Securing Corners

For corners, use your miter-cut boards to ensure a seamless look. Apply adhesive or nails as you did for the straight sections. Ensure that the corners fit snugly together for a clean finish.

Finishing Touches

After all the skirting boards are installed, take a step back and inspect your work. Look for any gaps between the wall and the skirting. Use a fill or caulk to fill in any spaces and achieve a smooth finish. Once resolved, you can paint or finish the skirting board as desired to match your interior decor.

Cleaning Up

Finally, clean your workspace and remove any debris or excess adhesive. Ensure all tools are stored away safely. With everything in place, step back and admire your newly installed plastic skirting boards!

If you are looking for more details, kindly visit how to fit plastic skirting board, pvc skirting for wall, skirting boards suppliers.